...
Key | Action |
|---|---|
b | Digitizing: Toggle on/off the rubber band in 2D digitizing |
f | Digitizing: Set a flag when digitizing. This means that one cell (line piece) is completed and the digitizing will start on a new cell. |
g | Fly and zoom towards the position you are pointing at. The cursor need to point at graphics, otherwise no action. This shortcut sould not be used in 2D-mode. |
h | Digitizing: Home, i.e. close current cell (line piece) by biting the "tail". |
i | Toggle on/off the interactive crosshair widget for cursor positioning. |
n | Digitizing: Nearest point. Grab whatever point is nearest to the cursor position. This is easiest to do in 2D-digitizing. In 3D digitizing this may be used in combination with p and the manipulation to set the cursor position. |
o | Toggle on/off color code legend for the last color contouring display. See also shell command cco - Color code legend. |
p | Position the cursor point. In 3d-mode this will result in a red marker at the cursor position. In 2d-mode, this is equal to just clicking by with the left mouse button. |
r | Rescale to all graphical elements. Note that r does not set the window. |
s | Set graphics back into surface mode after having viewed graphics in wire mode by w. |
u | Digitizing: End digitizing. This will terminate a digitizing session, and the result of the digitizing will be put into a workspace. For the digitizing started with shell commands, the workspace name is ^rcd. u will also remove the red point at the cursor position if displayed, even when not in a digitizing session. u may aslo be run as a shell command. |
v | Value. Will display a number (z-value) where the cursor is pointing. Note that you have to point at a displayed surface. |
w | Set graphics to wire mode. Return to the default surface mode by s. The equivalent shell command is wire - Wire mode |
x | Set the focal point. The graphics will afterwards rotate around this point. |
y | Digitizing: Cursor point is set at the surface of the graphical element |
z | Zoom by drawing a rubber band with left button on the mouse |
+ | Zoom in |
- | Zoom out |
2 | Toggle graphics to 2d mode |
3 | Toggle graphics to 3d mode |
3 | Toggle stereo view on/off when stereo is activated |