Page Comparison

...

Setting up a project

...

...

width	60%

A project in Geocap can be generated generic; i.e. along its development. It is however nice to have an initial setup. The project in this text is just called Wells and logs and referred to as the project. Here is the initial setup for the project with wells and seismic lines.

The contents inside the folders will gradually be generated along its use. The example shows what this test project may look like.

Working with the project manager and setting up a project is explained in project manager introduction Geocap Projects.

width

Info
title Quick explanation of the folders in the project:
Images. A folder to contain screenshots from the screen. Just a nice thing to have in order to save an informative display. The screenshots are taken by data->Screenshots Seismic lines. A folder to contain 2D seismic lines that are present in the wells area. A seismic line is read by Seismic lines->Import->SEGY-2D Well log images. A folder to contain well log images from some paper reports that are saved as images in a picture format (jpeg, png, bmp, etc ) and read into the project. They can be calibrated and displayed in the 3D scene attached to its well. A well log image is read by Well log images->Import->Generic. Browse in the images and use Automatic reading. Well tops. A folder to contain well tops. In this case the well tops are taken from NPD's facta pages. Wells. A folder to contain wells with all the logs. The wells are usually in LAS format and read into the folder with the LAS reader that is found under Wells->Import->LAS
Column
40%

Image Modified
Example contents of the well project

Selected commands in shared commands

...

...

Schema commands and shared commands are essential in Geocap. Read more about these features here: Commands.
For this particular task a set of shared commands has been selected to assist the working process. If you don't have this selected set, download it from well logs, well image and seismic.zip and install it into Shared Commands using the folder icon or Import option. You may also go to the Operation Mode entry and Uncheck all and then only Check the options Wells and Calibration.

The selected set of shared commands will contain the primary commands that are necessary to use for this application and will make it easier for the user to find the correct command option. The set looks like the display to the right.

It is important to understand that the use of shared commands is a convenient option for the user. Generally one may also find the same commands on the right click menu together with a lot of other commands. The shared commands will thus be the selected set to be presented to the user as the most actual command objects for the specific task.

...

Image Modified
Set of shared commands used for displaying well logs and seismic

Explanation of the shared command set

...

...

width	60%

The different command objects of the selected set in shared commands are organized according to their functionality. Here is a brief explanation of their use:

Import

Code Block
bgColor #ffffaa borderWidth 1 borderStyle solid
Import well tops: X Y Z NAME To read well tops, highligth the folder for Well tops and double click on Shared Commands->Import->Import well tops: X Y Z NAME.
Column
width 40%

Info
title The format of well tops is:
* Top depth (m) Litostratigraphic unit * 379378.45 7065951.07 253 NORDLAND GP 379378.45 7065951.07 253 NAUST FM 379378.45 7065951.07 1041 KAI FM 379378.45 7065951.07 1125 HORDALAND GP 379378.45 7065951.07 1125 BRYGGE FM 379378.45 7065951.07 1409 ROGALAND GP 379378.45 7065951.07 1409 TARE FM 379378.45 7065951.07 1487 TANG FM 379378.45 7065951.07 1750 EGGA (INFORMAL) 379378.45 7065951.07 1762 SHETLAND GP 379378.45 7065951.07 1762 NISE FM 379378.45 7065951.07 1811 KVITNOS FM

The file is composed using information from the well log report in NPD's facta pages. The command object for reading the report is tuned for this specific format. If you have problems with the reading, put all the text into "" (example: "NORDLAND GP"), and use a free format reading. The field data name for the text shall be lito.

...

width	50%

 Log display Tube and Ribbons

Code Block
bgColor #ffffaa borderWidth 1 borderStyle solid
Ribbon log display X dir Ribbon log display Y dir Tube log display

These display options are used when we want to see the well logs in tube or ribbon mode, see image below.

Log display direct mode

Code Block
bgColor #ffffaa borderWidth 1 borderStyle solid
Log Display black Log Display blue 180 Log Display green Log Display pink 180 Log Display red Log Display yellow 180

These display options are used when we want a quick visualization of the well logs. The name tells which color it is using and the number which direction. All the settings are up to the user to change in a real project. The changing is done in edit mode of the command object. One can copy and paste a command object and rename it according to the settings.

Log display interactive mode

Code Block
bgColor #ffffaa borderWidth 1 borderStyle solid
Log Display interactive1 Log Display interactive2

These display options are used when it is necessary to work interactively with the log display. The interactive mode is achieved by setting Execution mode to Interactive.

Work interactively and set the parameters for optimum display. Copy and paste and rename a proper command object according to the settings.

In general this application is tuned for displaying seismic in the background. Below is some examples of well log displays and a 2D seismic section running across that well:

...

...

Image Modified
 Well logs displayed in tube and ribbon mode

...

width	50%

Seismic display

Code Block
bgColor #ffffaa borderWidth 1 borderStyle solid
Seismic Display Seismic Display LOD

Seismic display are provided with to options:

1. Standard seismic display. It may be too smoothed to get all the details.
2. Level of detail (LOD) seismic display. A rendering technique that has different resolution according to view distance. Recommended and should be used if the graphical card supports it

...

1. 
   
   

Text

Code Block
bgColor #ffffaa borderWidth 1 borderStyle solid
Text at cursor position

Edit the command object and write in the preferred text. Then place the cursor at any position. In 2D mode this is done by just right click in the screen. Then press Execute.

Code Block
bgColor #ffffaa borderWidth 1 borderStyle solid
Well text at lower left

Highlight a well and Execute the command object. The text is placed at the lower left of the screen.

Well display options
Out of the command objects in this folder one option will be emphasized.

Code Block
bgColor #ffffaa borderWidth 1 borderStyle solid
Display well and scale

 

Highlight a well. Then Execute the command object. It scales the well to the middle of the screen and display a red line looked upright. Especially the scaling is important so that the well will be in focus. It is equivalent to well->Zoom to Data.

 

To display the well in a thicker line, execute Display well linewidth 3.

Well log image display 

Code Block
bgColor #ffffaa borderWidth 1 borderStyle solid
Well log image calibration

 This is a command object for calibrating and display of a well log report taken from a paper. The image is read into a Generic folder. Then it is calibrated to be displayed along the well.

 

Read more about this in Calibration and display of well log images.

The Operation mode entry Calibration shall be checked in in order to see the command object Well log image calibration.

Z annotation
Out of the command objects in this folder one option will be emphasized.

Code Block
bgColor #ffffaa borderWidth 1 borderStyle solid
Z annotate 100

 Highlight a well. Then Execute the command object. The well line is annotated for each 100 meter. Just a quick way to display the height along the well string. The other command objects have similar functionality.

 

Well annotation is also found in the Log Display menu.

...

 

Image Modified
 Well logs displayed in curve mode together with seismic

Applying workflows

Workflows are a convenient way to display a composite graphical scene. Below is examples of workflow elements for two wells.

...

A specific workflow has been prepared to guide and steer the application. If you don't have this selected set, download it from Well logs in 3D scenes.gwfzip and open it using the File->Open entry. You must edit all the workflow elements to suit the specific project having relevant data.

...