Page Comparison

Generate a new and empty Seafloor project

1. In the main menu of Geocap, click Seafloor > Seafloor Main Menu.
2. In the Seafloor Main Menu click File > New > Project. A new dialog will pop up.
3. Select the Seafloor project template.
4. Type in the name of your project in the Name field. The name may consist of letters, numbers and spaces, but special characters like [, æ,ø, å, &, /, % ... should be avoided.
5. Click the Browse button, and select where you want to store your project on your hard disk.
6. Click Finish.

You will now be prompted with a window asking you if you want to define the geodetic setting of the project.

1. Click Yes.
2. Check the Use geodetic settings for project box and select WGS84 as datum and UTM Zone 32 N as coordinate system.
3. Click OK.

Explore the project settings

• Click the icon on the project toolbar to look at the settings. Pay particular attention to Geodetics. You can see that the settings you previously entered are stored here. You can also access these from the Seafloor main menu Edit > Geodetic Settings.