...
A project in Geocap can be generated generic; i.e. along its development. It is however nice to have an initial setup. The project in this text is just called Wells and logs and referred to as the project. Here is the initial setup for the project with wells and seismic lines.
Example contents of the well project
The contents inside the folders will gradually be generated along its use. The example shows what this test project may look like.
...
The selected set of shared commands will contain the primary command objects that are necessary to use for this application and will make it easier for the user to find the correct command option. The set looks like:
Set of shared commands used for displaying well logs and seismic
It is important to understand that the use of shared commands is a convenient option for the user. Generally one may also find the same commands on the right click menu together with a lot of other commands. The shared commands will thus be the selected set to be presented to the user as the most actual command objects for the specific task.
...
These display options are used when we want to see the well logs in tube or ribbon mode, see image below.
Well logs displayed in tube and ribbon mode
•Log display direct mode
Log Display black
...
In general this application is tuned for displaying seismic in the background. Below is some examples of well log displays and a 2D seismic section running across that well:
Well logs displayed in curve mode together with seismic
•Seismic display
Seismic Display
...
Workflows are a convenient way to display a composite graphical scene. Below is examples of workflow elements for two wells.
Well logs and seismic displayed by executing a workflow
A specific workflow has been prepared to guide and steer the application. If you don't have this selected set, download it from Well logs in 3D scenes.gwf and open it using the File->Open entry. You must edit all the workflow elements to suit the specific project having relevant data.
...