A project in Geocap can be generated generic; i.e. along its development. It is however nice to have an initial setup. The project in this text is just called Wells and logs and referred to as the project. Here is the initial setup for the project with wells and seismic lines. The contents inside the folders will gradually be generated along its use. The example shows what this test project may look like. Working with the project manager and setting up a project is explained in project manager introduction Geocap Projects. | Info |
|---|
| title | Quick explanation of the folders in the peoject: |
|---|
| - Images. A folder to contain screenshots from the screen. Just a nice thing to have in order to save an informative display. The screenshots are taken by data->Screenshots
- Seismic lines. A folder to contain 2D seismic lines that are present in the wells area. A seismic line is read by Seismic lines->Import->SEGY-2D
- Well log images. A folder to contain well log images from some paper reports that are saved as images in a picture format (jpeg, png, bmp, etc ) and read into the project. They can be calibrated and displayed in the 3D scene attached to its well.
A well log image is read by Well log images->Import->Generic. Browse in the images and use Automatic reading. - Well tops. A folder to contain well tops. In this case the well tops are taken form NPD's facta pages .
- Wells. A folder to contain wells with all the logs. The wells are usually in LAS format and read into the folder with the LAS reader that is found under Wells->Import->LAS
|
|