...
Use the Shot point, Byte pos. spinbox to set the appropriate byte position.
Coordinates and scaler
Make sure the X coordinate has 6 digits and that the Y coordinate has 7 digits. In some cases the scaler may be wrong, causing the X and Y values to have to few or to many digits. This can be adjusted by changing the scaler multiplication factor.
...
Coordinates, interval and scaler
Make sure the X coordinate has 6 digits and that the Y coordinate has 7 digits. The coordinate Interval often gives us a good indication of if the coordinate is set correctly, as most seismic cubes have an interval of 12.5, 25, 50 meters or similar. In some cases the scaler may be wrong, causing the X and Y values to have to few or to many digits. This can be adjusted by changing the scaler multiplication factor.
...