Page Comparison

Create a layer cube.

1. Use Zoom to Folder on the layer model to get the overall layer window.
2. Highlight layer model folder and activate the command Cube generation of all layers.
3. Click Use Active Window to set the cube window.
4. Set the cube grid increments to 500 500 20 to get 282 x 190 x 20 grid nodes.
5. Click Execute. The cube is saved in workspace cubegrid.
6. Get the cube gid into the project under the Time folder and rename the cube to time_cubegrid.
7. Apply the Manipulator to display the layers in the cube in a fast way in all directions.

   Tip
   title Setting cursor for cross section action
   The manipulator is for a cube is activated by cube > Utilities > Manipulator cube display.

8. Run the manipulator in all directions on the cube.
9. Display a layer grid to verify that the cross sections from the cube have correct extensions.