...
| Info |
|---|
This functionality will be avalaible in the Geocap 7 release version. |
Introduction
This section contains the documentation on how to import, display and process Water Column Data from Multibeam echo sounders. All the operations are performed from a folder of schema type Multibeam in a Geocap Seafloor project.
...
The Multibeam folder menu with the water column tools
Typical workflow
- Before loading the water column data the survey line must have an entry in the project. This means the depth data for the same survey line first must be imported by the command Import Multibeam Sonar Data.
- The import of water column data is done with the command 9xx. Multibeam Water Column data. The import can be time consuming dependent on the size of the file.
- To visualize the water column data, use the command 9xx. Multibeam Water Column data. This will display both the swath and optionally the alongtrack of the water column data. This command exist on both the Multibeam schema type folder and the Multibeam Survey schema type folder.
- To convert the water column swath data to point cloud data, use the command 9xx. Multibeam Water Column data. This command will extract features and filter away much of the noise in the swaths.
- To visualize the extracted point cloud data, use the command 9xx. Multibeam Water Column data.
Import Multibeam Water Column Data
This command will import water column data to Multibeam Survey type folders already loaded in the Multibeam type folder.
The Import Multibeam Water Column Data dialog
The content of the menu
The upper part of the menu shows the name of the project and folder the command is activated from.
...
The Display Water Column Swath dialog
Display Water Column Swath
This command is executed from folders with schema type Multibeam and will display the water column data (swath) from the selected dataset. The command can also be opened directly from a Multibeam Survey line.
The content of the menu
The upper part of the menu shows the name of the project and folder the command is activated from.
...
The Extract Water Column Points dialog
Extract Water Column Points
This command is executed from folders with schema type Multibeam and will extract the content of water column data (swath) as point cloud data sets. An area filter can be applied to extract data inside a specific geographic area only, and not for the whole survey line.
The content of the menu
The upper part of the menu shows the name of the project and folder the command is activated from.
...
The Display Water Column Points dialog
Display Water Column Points
This command is executed from folders with schema type Multibeam and is used to display Water Column Points from the selected datasets.
The content of the menu
The upper part of the menu shows the name of the project and folder the command is activated from.
...