Zoom to data on the interpretation lines in the project: _02_Time data > Interpretation lines
Display the seismic interpretation lines.
Draw the windows frame by clicking
Set the screen in 2D mode.
Display the border line from the project: _01Cultural > Boundary > border_line
Use Tools -> Quick Digitizer to digitize your own border line and save it. F.inst. name it border_line2.
The project window is usually set in the Project Settings panel under Data.
Section
Column
width
60%
Look at the other options in the project settings panel.
Info
title
Features regarding the project window
All the reservoir grids in the project are usually gridded within the project window.
The gridding panels have there own window settings that should for convenience coincide with the project window.
If you change the project window and use that as a new grid window you cannot mix grids with different grid window in a reservoir model
Section* - Used to change project name. Geodetics - We use UTM 51 S as our projection and WGS83 as our datum. Graphics - It is an advantage to erase the screen when loading the project because the no graphics from another area will disturb the current graphics when the system calculates visualization parameters.
Column
width
40%
Project window set in the Data section in project options
Look at the other options in the project settings panel.
Info
title
Features regarding the project window
All the reservoir grids in the project are usually gridded within the project window.
The gridding panels have there own window settings that should for convenience coincide with the project window.
If you change the project window and use that as a new grid window you cannot mix grids with different grid window in a reservoir model.