Page Comparison

Introduction

CUBE (Combined Uncertainty and Bathymetric Estimator)

is an error-model based, direct DTM generator that estimates the depth plus a confidence interval directly on each node point. The CUBE library is developed by University of New Hampshire.

The implementation in Geocap Seafloor is modfied to work with echo sounder models

which were not in the market when Cube was created.

The latest release of the Cube library was in 2004.

 
The output of the command is a depth surface

named Surface_

Cube_

<depth algorithm>. The surface can also contain additional attributes like Uncertainty,

 DepthHypothesesNumber and HypothesisStrength dependent on the selected options in the dialog. The result will also be named with the attribute.

The content of the menu

Image Modified   Image Modified

The CUBE dialog for multibeam data and CUBE for XYZ data in a Soundings folder.

Input Data

The Input data

 part of the dialog is where to select which data items to be gridded. The CUBE command works with both multibeam data (Survey Line)  and with XYZ data (Dataset). Select data items from the list.

The

rows X, Y

 and Z are automatically updated with the minimum and maximum extensions of the coordinates from the selected files.

The Coordinate System

 field shows the type of coordinate system for the data.

Cube Algorithm Parameters

The Cube Algorithm Parameters part is where to specify parameters for the CUBE depth processing. The parameters to set:

• Depth Estimation Algorithm
• Grid increments
• Error Distribution Model Algorithm

Depth Estimation Algorithm

The options for the depth estimation algorithm are:

• Nodal estimate algorithm: This is the default algorithm for the implementation of Cube.

• It will create the depth surface and the operator can select to also create

• the Uncertainty

•  attributes to

• the cube_depth_surface. 

• Bined mean algorithm:

•  This algorithm will create the surface based on

• the mean values

•  in the bins (cells). No attributes can be created. 

• Bined median algorithm:This algorithm will create the surface based on

• the median values

•  in the bins (cells). No attributes can be created. 

• HyperCUBE super-grid:

•  The HyperCUBE super-grid is creating a grid based on several hypotheses from the depth data. In addition to the depth grid this algorithm can also create the

• attributes Uncertainty, DepthHypotheses and HypothesisStrength as output in

• the Surface_

• Cube_

• <depth algorithm>. This depth estimation algorithm is implemented for multibeam data only. This algorithm is currently not available in Geocap Seafloor. 

Grid increments

Specify the increments:

• X Increment (m): Specify the increments in X-direction (Easting) for the result grid.
• Y Increment (m): Specify the increments in Y-direction (Northing) for the result grid.

The lower left corner and the upper right corner of the result grid will be rounded down and up to contain the increments. (A 5 meter grid increment result in a lower left corner starting on an integer value of 5 meter.)

Error Distribution Model Algorithm

Specify the type of the error distribution

• FULL: Implemented for multibeam data only. Will use all information from the multibeam data's Vessel Configuration to estimate as accurate as possible the 
• IHO: Implemented for multibeam data and XYZ data. When selected, the IHO order can be specified below.

The IHO Order (prediction model):

• • Special Order: Areas where under-keel clearance is

• • , i.e. the depth is less than 40 meters.
  • Order 1a: Areas shallower than 100 meters where under-keel clearance is less critical, but features of concern to surface shipping may exist.
  • Order 1b: Areas shallower than 100 meters where under-keel clearance is not considered to be an issue for the surface shipping expected to transit the area
  • Order 2: Areas generally deeper than 100 meters where a general description of the sea floor is considered adequate.

Output

Select options for what output to create.

• Depth Surface: The depth surface will always be produced in the 

• Surface_

• Cube_<depth algorithm> result surface

• .

• Uncertainty Surface: When using the depth estimation algorithms Nodal estimate algorithm

•  or HyperCUBE super-grid this option can be checked.

• The Uncertainty

•  values will be an attribute in the 

• Surface_Cube_<depth algorithm>. The text "_Uncertainty" will be added to the result name.

• Number of Hypotheses Surface: When using the depth estimation algorithms Nodal estimate algorithm or HyperCUBE super-grid this option can be checked.

• The DepthHypothesesNumber values will be an attribute in the 

• Surface_Cube_<depth algorithm>. The text "_HypothesesNumber " will be added to the result name.

• Hypothesis Strength Surface: When using the depth estimation

• algorithm HyperCUBE super-grid this option can be checked. The HypothesisStrength values will be an attribute in the 

• Surface_Cube_<depth algorithm>.  The text "_HypothesisStrength" will be added to the result name. Since the algorithm HyperCUBE super-grid is currently not available, this output will not be possible.

The Results

After executing the volumetrics a dialog will pop up showing the parameters, result and volumes from the calculations. The report itself is saved in the project structure in a folder named Reports under the same folder as the command is executed from. The report itself is named as YYYYMMDD HHMMSS CUBE (the name of the executed command).

All reports from all runs will be saved in the Reports folder.