...
The Edit Vessel Configuration dialog
The Hardware tab in the Edit Vessel Configuration dialog.
The Edit Vessel Configuration dialog The Edit Vessel Configuration dialog is opened from a vessel configuration by right click and select select Edit.
The dialog shows the vessel configuration name and has four tabs:
- Hardware
- Mount parameters
- Processing parameters
- Standard deviation parameters
The Hardware tab
The Hardware tab in the Edit Vessel Configuration dialog.
The Hardware tab contains information about the multibeam echo sounder make, the input file type, hardware configuration and datagram content.
It is also possible to set up the type of motion sensors and gyro. This information can be used by the standard deviation parameters tab, and for example by the CUBE command. The information is not automatically detected when importing the survey lines.
...