...
Each tab holds the parameters for the actual type of sensor value. The tabs contains three columns, one with the type/name of the parameter, one with the Current Value, and one with the File Value.
The Current Value can be changed by the operator. To see the changes in the data before finally accepting the changes, clik the Apply button. All survey lines which are affected and displayed will be updated and re-displayed with the new parameters.
...
Create new vessel configuration
A new vessel configuration can be created by copying an existing configuration inside the same project or copy from another. By right clicking a vessel configuration in the project named Course, for example Kongsberg em710, and select Create copy in > Course.
A new configuration named Kongsberg em710 (1) will be created. Then rightclick the new configuration and select Rename and then give the configuration a proper name, for example Kongsberg em710 new.
This new configuration can be modified and applied on selected survey lines. When clicking the Kongsberg em710 new entry no survey lines are shown in the Survey lines part. Then, in the survey lines list, select the actual survey lines, right click and select Set vessel configuration > Kongsberg em710 new.
