If your application also shows a 2D Scene window you can close this by clicking the X

1. Zoom out by scrolling downwards on the mouse wheel.

2. Pan by pressing the right mouse button and moving the mouse in any direction.

3. Rotate the displayed data by pressing the left mouse button and moving the mouse.

4. The focal point is the center of the display and the point of rotation. Change the focal point by positioning the mouse cursor on a desired point in the display window and double click the left mouse button.

5. Adjust the Z-scale by using the slidere on the far right on the main menu
   
   

1. In the Table of Content (TOC) click on the seismic cube “ST10010ZC11…” and a menu with tree sliders will appear.

2. Click and drag on one of the sliders and observe that:

   1. the section moves in the 3D window

   2. the blue line corresponding to the seismic section in the map moves

3. Click one of the arrows on each side of the sliders to step one inline/crossline/timeslice at a time.

1. In the Table of Content (TOC) click on the three dots “⋮” next to seismic cube “ST10010ZC11…” and select Settings

2. Click and drag the % Cut slider to increase or decrease the mapping range of the amplitudes evenly

3. Click and drag the Min or Max to increase or deacrese the mapping rang of the amplitudes individually

4. Click on the Display section of the settings menu

5. Click on the grayscale color table to select it

6. Click OK

1. On the main menu click 2D to open the 2D window.

2. In the Table of Content (TOC) click on the three dots “⋮” next to seismic cube “ST10010ZC11…” and select View in 2D. A seismic section will displayed in 2D.

3. Use the sliders from one of the previous exercises to change which section to show.

4. Notice that that there is cursor tracking between the seismic section and the map

5. Notice that the thick red line in the map represents the extent of the seismic section you are looking at. i.e. when zooming in the line gets narrower.

6. Notice that the intersection with the interpreted surface is display as a line

7. Click X on the 2D Scene window to close it.

1. In the Surfaces folder tick the check box next to SHETLAND_GP_TOP to display it

2. Click the three dots “⋮” next to SHETLAND_GP_TOP and select Settings

3. Click the Display section of the settings menu.

4. Go to Coloring method and select ColorLookup from the dropdown

5. Go to Transparancy and move the slider to 0

6. Click the Data section of the settings menu

7. Click and drag the Min and Max sliders to adjust the mapping range of the depth values

1. In the Wells folder expand the Wellheads by clicking on the small triangle

2. Click the small triangle in front of 15/9-F-14 and repeate on the same item below

3. Observe the different well logs available

4. Uncheck the GR log and check the ROP log

1. Click the ruler icon on the main toolbar. This will open a new menu.

2. Select the starting point by clicking anywhere in the 3D window.

3. Place your mouse cursor at the end point and double click

4. A line will be displayed and the menu will report path distance, horizontal and vertical distance.

5. Click X to close the menu